Take sheet
The take sheet writes down every record pass as it happens, and keeps what you mark and type beside it: selects and alts, tags, the script line, notes. Export it as a PDF for the client or a spreadsheet for the editor.
Your first take sheet
With Pro Tools connected and a session open:
- Open the take sheet: File ▸ Take Sheet… (⌥⌘T), or the take sheet button beside the SessionHUD logo at the top of the Designer.
- Arm a track and record. A sheet starts by itself at the session’s first take, and the pass is a row, ringed in red while it records. When the transport stops, its length is filled in.
- Click the take number to mark it a select; right-click it for an alt. If the line was read more than once in the take, press + beside the number for a letter per read — A, B, C — and mark the letters instead. None of this takes the keyboard from Pro Tools, so the space bar still runs the transport.
- Click the take’s Line cell and type the script line. Every take after it carries that line until you type another. Press Esc, or click back in Pro Tools, to give Pro Tools the keyboard again.
- Press Export… at the bottom of the sheet. The export window shows the PDF exactly as it will be; choose CSV or Excel at the top of the options for a spreadsheet. Its Export… button asks where to save, starting in the session’s Bounced Files folder.
Logging takes
Each pass is a row: the take number, when it started, its timecode, how long it ran, the track and the file Pro Tools wrote. Open the take sheet with File ▸ Take Sheet… (⌥⌘T), the take sheet button beside the SessionHUD logo at the top of the Designer or of Session Controls, or Take Sheet… in the SessionHUD menu bar icon’s menu or the Dock icon’s menu. In Session Controls the button stays lit while the take sheet is on screen, and pressing it then closes the take sheet, as the Designer button beside it does for the Designer. Takes are still logged.
A row appears when a pass starts and is filled in when the transport stops. While a take is recording, its row is ringed in red and its length counts up; when the transport stops, the take’s own length replaces the count. Under the sheet’s name, the top of the window says whether takes are being logged: Logging while they are, Recording take 36 during a pass, and, in amber, when they are not — Pro Tools not connected, logging paused, or no current sheet. A take canceled in Pro Tools (⌘.) is taken off the sheet. With several tracks armed there is one row per pass, numbered by the same track as your outputs (below), and the other tracks’ takes are listed under the file name. A value nobody measured is a dash. Notes is anything you want to say about the take.
Undo in Pro Tools leaves the undone take’s file on disk, in case you redo it, so the take sheet can’t see an Undo as it happens. It finds out when the next take is recorded over that take’s name, which Pro Tools does by giving it the undone take’s number. Then the undone take’s row, and every take recorded after it, is hidden, because Pro Tools undoes the newest first. Nothing typed on them is lost: turn on Show hidden takes in Sheet Settings to see them, each saying Undone in Pro Tools in grey after its notes, or in the In Session column when that is on. A take hidden as missing says why the same way. The take recorded again gets a row of its own. If a line, notes or tags were typed on the undone take it replaces, they follow its notes in grey — Undone take: Faster · Line 35 — with Keep and × beside them. Keep brings that take’s line, cue, notes, tags and your own columns into this one, though not its marks or letters; × leaves them on the undone take. The take’s right-click menu has the same two choices, and the sheet’s Undo takes either back. A take that seems to be canceled just as the next one starts is treated as part of the Undo, because Pro Tools clears the later undone takes’ files at that moment. If the next take is on tracks none of the undone takes used, the undone takes’ rows stay until a take is recorded over one of their names.
In Session. A take can still be in the session’s Audio Files folder when it is no longer in the Pro Tools session — after an Undo, or after clips are cleared — and someone sent the session, or files exported from it with Export Clips as Files, won’t find it. A take can also be in the session with its file gone: deleted, moved, or on a drive that isn’t connected. The take sheet asks Pro Tools for the session’s files when a take stops, when a session opens, when the take sheet or an export opens, and when you press Check Against Session under This Session in Sheet Settings, which also says when it last checked and what it found. It looks for each file on disk where Pro Tools says it is, so a take recorded to another drive with Disk Allocation is looked for there. It never watches continuously, so an Undo shows up at the next of those moments. Turn on the In Session column to see why a take is missing: empty for a take that is in the session with its files found, Not in session, File not found, Burned for a number Pro Tools skipped, and a dash before it has been checked. Renaming a clip in the clip list doesn’t make its take missing. Files dragged straight out of Audio Files aren’t checked: the column tells you which ones to leave out.
Missing takes are struck through: the line runs across the whole take, which stays where it was recorded with everything typed on it. Under Takes in Sheet Settings, Missing takes can hide them instead, or leave them as they are. A hidden missing take comes back with Show hidden takes, marked Missing, and shows again by itself if the take is found back, after a Redo, say. Missing takes are never shown in a Take Log on the outputs. Exports leave them out unless you choose Include missing takes; a take not checked yet is written.
Include Take is the way back when a take is called missing and you know better. Right-click the take, or click the space after its letters, and choose Include Take: it is no longer struck through or hidden, and it goes on the Take Log and into exports like any other take. The In Session column still says what Pro Tools reported, so anyone reading the sheet can see you included it. Later checks leave it included; choose Include Take again, or press ⌘Z, to take it back. An included burned number is exported, but never shown on the outputs.
Burned takes. Once in a while Pro Tools skips a take number — take 9, then take 11. The take sheet adds a row for the number it skipped, marked Burned, with no time, file or length, so nobody reading the sheet wonders where take 10 went. It does this only when nothing is under the number: no file in the session or on disk beside the takes around it, and no row on the sheet. A take recorded while SessionHUD wasn’t running is never called burned, and neither is a gap of more than two numbers. A burned row is a missing take: struck through, hidden, or left as it is, and left out of exports, like the others.
Marking a take or a letter never takes the keyboard from Pro Tools: click a take number, a letter, the − +, the space after the letters or a tag in the strip mid-take and the space bar still starts and stops the transport. Clicking anywhere else on the sheet — a field, a heading, a button, Sheet Settings, the list — brings SessionHUD forward with the keyboard, as clicking any window does, and it keeps it while you work in the window. The field you are typing in has a blue ring round it and a blinking cursor. Click back in Pro Tools, or press Return or Esc in a field, and the keyboard goes back to Pro Tools.
While the take sheet has the keyboard, the standard shortcuts work: ⌘Z undoes the sheet’s last change and ⇧⌘Z redoes it, in a take’s cell too. Pressed while you are typing a line or a cue, ⌘Z first takes back what you typed there, then the changes before it; in the search, a sheet detail or a column’s name it undoes your typing in that field. ⌘X, ⌘C, ⌘V and ⌘A in a field, ⌘N for New Sheet, ⌘F to search the sheets, ⌘W to close the window and ⌘M to minimize it.
The window

- List of sheets — this session’s sheets, then every earlier session’s. The button at the left of the top bar hides it.
- Top bar — the sheet’s name and whether takes are being logged, here Recording take 2; Undo, New Sheet, the tag strip’s button, Sheet Settings and the pin.
- Takes — one row per pass, the one recording ringed in red. A bar joins each line’s takes, and a rule marks where the record track changes.
- Next row — what you type or tag here moves onto the next take when it starts recording.
- Tag strip and bottom bar — the tags, here on take 2 as it records; under them the sheet’s Track, its counts, whether it has been exported, and Export…. The text size is just above the strip.
The list of sheets is down the left (Sheets), the takes fill the middle, and Sheet Settings opens down the right. Along the top, after the button that hides the list, is the sheet’s name, with whether takes are being logged under it; at the right end is what you press during a session: Undo, New Sheet, the button that shows and hides the tag strip, the pin, and the one that shows and hides Sheet Settings.
The pin at the top right keeps the take sheet Always on Top, above Pro Tools and every other app’s windows, even with Pro Tools full screen. It is on until you turn it off. Off, the take sheet is an ordinary window that Pro Tools can cover; clicking it brings it back in front — with the keyboard, unless the click was a mark or a letter. The window remembers which.
The two small buttons in the bottom right corner of the takes, above Export…, make the takes smaller or larger, from 80% to 150%: their text, take numbers, letters and the − + beside each take, and the columns with them, so nothing is cut off. The bar, the list of sheets and Sheet Settings stay as they are, and the PDF has its own text size. Point at either button to see the size you are at. Every take sheet uses the size you leave it at.
The bar along the bottom shows the sheet’s Track (below) and what the sheet holds: its takes, its lines, the time recorded across them, and how many selects and alts. Hidden takes are not counted. Export… is at the other end.
Letters, selects and alts
When a line is done more than once inside one take, press + in the − + button beside the take number to add a letter: A, B, C and on. − removes the last one. The button stays where it is however many letters a take has, so + can be pressed again and again. Clicking the empty space after a take’s letters adds the next letter too, and right-clicking it removes the last one. Right-clicking anywhere else on the row away from the take number and letters opens the take’s menu: Add Letter, Remove Letter and Hide Take. To have a right-click after the letters open that menu too, turn off Right-click after the letters removes the last one in Settings › Take Sheet. A letter removed while marked keeps its mark: add it back and it is a select, an alt or struck out again.
When every take is several lines in a row, choose Letters per new take under Takes in Sheet Settings: 3 starts each take with A, B and C, up to 6. Each sheet keeps its own choice, and it applies to takes recorded while SessionHUD is watching, not to takes picked from the session’s files. A take with a line more or a line less is changed as any other, with + and −. A take has at most 26 letters, A to Z: at Z, + dims.
The Letters column always keeps one empty place after the most letters any take has, so even that take has room to click. To leave the − + button off every take, turn off Show − + in Letters in Settings › Take Sheet; the letters then start at the edge of the column, and you add one by clicking after them.
Click the take number or a letter to mark it a select, shown filled. Right-click it, or Control-click, to mark it an alt, shown as a solid outline; an unmarked one has a dashed outline, so the two differ in shape as well as color. Either dashed outline can be turned off in Settings › Take Sheet, and an alt letter can be drawn in a square instead of a circle with Square alt letters. A right-click on a take number or letter is always an alt. Clicking the same way again clears the mark. VoiceOver offers Mark as select, Mark as alt and Strike out on each one. Selects are SessionHUD blue and alts magenta, unless you choose another Select color or Alt color, or Ink for black (white in dark mode), in Settings › Take Sheet; the PDF export uses them too.
To show those calls in the room, select the Take Log preset on the HUD Window, Browser Viewer or Full Screen. Notes and custom columns stay on the sheet. Tags are off by default.
To strike out a false start or a read you can’t use, Command-click its letter, or the take number for the whole take. It is drawn with a slash through it, and Command-clicking it again takes the slash off. A read that is struck out is not a select or an alt: striking a select or an alt replaces it, and Selects and Alts never list a struck read. The PDF prints the slash too. A CSV or Excel export lists the letters without it. A pass too short to be a take at all can be hidden as it is recorded instead, with Short passes under Takes in Sheet Settings.
Tags
Most of what gets said about a take is one of a handful of words — Faster, Slower, Louder, Softer, Energetic, Casual. Those are tags, in a strip along the bottom of the take sheet, above the bottom bar. Click a tag to put it on the take; click it again to take it off. A tag that is on is filled, with a tick. Clicking a tag leaves Pro Tools in front with the spacebar, as clicking a take’s letters does, so you can tag mid-take.
The strip says which take it is tagging at its start: Take 14. While a take is recording, it is that take, in red. Otherwise it is the last take on the sheet that is not hidden — the one you just heard. If a new take starts recording as you click, the tag goes on the new take; Undo takes it back. The strip is on the sheet new takes go to; the tag button at the top of the window shows and hides it. While the Tags column is hidden, the strip and its button are hidden too, since a tag would have nowhere to show. Show the column again and they come back as you left them.
A take’s tags are in the Tags column, just before Notes. To tag any take, not just the strip’s, right-click its Tags field (or Control-click it): every tag is in the menu, ticked where the take has it. Choosing one puts it on the take, or takes it off, and closes the menu; open it again for another. The take’s right-click menu elsewhere on the row has the same tags under Tags. Both work on any sheet you can edit. + at the end of the strip, and Add Tag… in those menus, add a word of your own to this sheet’s tags and put it on the take. Exports write them in a Tags column, or at the start of Notes — Faster, Energetic — breath at the top — with Print tags in Notes.
A take keeps its tags as the words were when you clicked them. Renaming or removing a tag in Sheet Settings changes the strip, not the takes already tagged.
Lines
Type the script line in Line on the take that starts it. Every take after it
is under that line until you type another, including takes already recorded; clearing a line
puts its takes back under the one before. A line is whatever your script uses:
35, a range like 46-51, or one with letters like
46A-54AD. Press Return to move to the next take’s Line, so a
run of lines is typed straight down the column; after the last take it moves to the
next-take row, and Return there gives the keyboard back to Pro Tools.
Cue, for reel or cue numbers, works the same way and is off until you turn
it on.
The Line column says each line once, on its first take: the takes under it are left blank, even where you typed the same line again, so a number in the column always means a new line. With Line Groups hidden, those takes show a faint ditto (″) instead, so a blank always means no line, unless the takes are shaded by line, since the shading already shows where each line starts and ends.
A bar beside the take numbers joins the takes of each line that has more than one. The line new takes are joining has its bar in color, from its first take. Any other line of a single take has no bar, since its Line says it; to give those a bar too, turn on Show bar on single-take groups under Grouping in Sheet Settings. It does the same for a Spot or any other group of one take. Point at the bar for the line, how many takes it has and its selects and alts. A line you come back to after another, typed again, gets a bar of its own, and its summary also says how many takes it already had: Line 35 · 2 takes · 5 takes earlier.
Shading, under Grouping in Sheet Settings, puts a grey ground under Every other line’s takes, so a line can be followed across the sheet, or under Every other take, so a row can be; one or the other, never both. It is off until you choose one, and works whether the line’s bar is shown or not.
While a track is armed in Pro Tools, the last row on the current sheet is the next-take row, marked Next where a take number would be. With nothing armed it is hidden, unless something is already set on it. Its fields are shaded light grey so you can see where to click. Type the line, cue, note or your own columns for the take you are about to record there — on the last take of a line, say, the next line — and it moves onto that take’s row the moment it starts recording, leaving the next-take row empty again. Click its Tags field to tick tags for that take, or right-click anywhere else on the row for Tags. Its letters start as Letters per new take sets them, and − and + (or a click after the letters) change how many that take starts with; the letters can’t be marked until the take has been recorded. It has no take number, because none is known until Pro Tools records one. If the take is canceled, or is shorter than the sheet’s minimum and hidden as a false start, what you set goes back to the next-take row for the take after it. The next-take row is never exported.
When the record track changes — you arm another track, or rename the one you are on — the numbers usually start again. A rule across the sheet marks where, over the new track’s take 1, whose Track cell names it. With the Track column hidden, or Name dividers on, the rule says the track too: Jon_TK2. It goes wherever a take’s track differs from the take above, and the PDF draws it too. It is on unless you turn off Divide takes where the track changes, under Grouping in Sheet Settings; like the rest of Grouping, it is the sheet’s own.
A new track usually means a new line, so the line’s bar and the every-other shading start again under the rule. The line itself still carries on from the take above, since it may not have changed: if it did, type the new one over it, or type it into the Next row before you record.
The sheet’s track
The sheet uses the same take track as your outputs, so a take has one number everywhere. Choose it from Track in the bar along the bottom of the take sheet, which shows when more than one track is armed and is the same choice as the Track menu in Session Controls and the Designer: a rule, such as Bottom armed track, or a track by name. Takes already on a sheet keep the numbers they were logged with, so changing the track changes the numbers from the next take on.
New Take and Stop
Two buttons along the bottom of the current sheet, so a fast session can stay on the take sheet, and the same two in Session Controls. They show from the start; to take them away from either place, untick its box under Show in in Settings ▸ Commands. They are the only thing on the take sheet that changes Pro Tools, and they send nothing until you press one. There is no confirmation: the press is the decision.
New Take stops the take and starts another, or starts one if Pro Tools is stopped. Type the next line in the next-take row, press, and the line lands on the new take. Stop stops Pro Tools, recording or playing. A press leaves Pro Tools in front, with its spacebar.
The new take starts where Pro Tools’ cursor is, as it would from the spacebar: after a take with Insertion Follows Playback on, that is where the take stopped. To have every take start at the end of the last one wherever the cursor is, turn on Start each take where the last one ends in Settings ▸ Commands.
SessionHUD waits for Pro Tools to confirm each step before it sends the next, so a slower Mac simply takes longer. Pro Tools has to stop and start again, and nothing records in that moment: about a third of a second on a fast Mac, more on a slower one. Between lines that is usually nothing, but a word spoken across it is clipped. Each take lands the way it does when you start it from Pro Tools, as the whole file. If Pro Tools is slow to arm in QuickPunch, SessionHUD starts the take anyway and the clip may start a moment into its file, with the audio still there to trim back to.
New Take works in QuickPunch and Normal, with a track armed. It is dim during playback, so a mis-press during a client playback cannot start recording, and dim in any other record mode: Loop has not been tested, and Destructive overwrites audio. The strip says why. It never changes your record mode. The buttons do nothing for about half a second after a press, so a double click cannot end the take it just started. They are not on an earlier sheet, and nothing on the browser page or the API can reach them.
SessionHUD never sends a command twice, because PTSL only has toggles and a second one would flip the transport back. When a step does not happen, it stops and says so on the strip, with the detail in Diagnostics:
- PLAYING, NOT RECORDING. Pro Tools rolled but did not start recording. In QuickPunch it is capturing from Play, so press Record in Pro Tools to keep the whole pass. Stopping throws it away, which is why SessionHUD does not stop for you.
- Pro Tools has not stopped, so no new take was started. It gave up after about three seconds, and it will not start a take late when the stop finally comes. A dialog open in Pro Tools is the usual reason.
- Pro Tools did not start again. Nothing is recording. Pro Tools stopped, and the roll never came. Press New Take again, or start from Pro Tools.
- Pro Tools refused the command. Pro Tools said no, often because it was busy. Nothing more was sent.
- The transport is still armed: the next spacebar records. A take that did not start could not disarm the transport. Disarm it in Pro Tools.
- Pro Tools did not show where the last take ends, or The cursor did not reach the end of the last take, so no take was started. Only with Start each take where the last one ends on. Nothing was armed. Press New Take again, or place the cursor and start from Pro Tools.
Play Last Take
For a client who asks to hear that one back. Tick Take sheet under its Show in in Settings ▸ Commands, and press it with Pro Tools stopped. SessionHUD finds the take on the timeline, selects it, plays it through Pro Tools and your monitor path, and stops at its end. Your cursor goes back where the next take starts as soon as it is playing, so you can stop it with the spacebar or Stop and record straight away. New Take stays dim during playback, so stop first. The press leaves Pro Tools in front.
Play in place plays the take where it lies. If the take’s track is monitoring its input (its input monitoring button on in Pro Tools), it would play the booth instead, so SessionHUD turns input monitoring off on that track just before it plays and back on when it stops, before New Take can record. Meanwhile the button reads Playing · Input Monitoring Off, and the line beside it names the track. If you turned it back on yourself meanwhile, it’s left as it is. If a take starts during the playback, nothing is changed while it records; monitoring comes back at the next stop, and the line says so until then. If it can’t be turned off, nothing plays, and if it can’t be turned back on, the strip says so in capitals. No other track is touched. To have SessionHUD leave monitoring alone, turn off Turn off input monitoring for playback; such a take then isn’t played. With remote talent who has to keep hearing the record track, choose Copy to a track, then play and, under Copy to, the track above or below the take’s, or a track by name. Above and below work in any session whatever its tracks are called; a name carries over to every session made from the same template, whatever its capitals. If the open session has no such track, the button says so, and Settings ▸ Commands can add it. The take’s clip goes on that track at the same place on the timeline, and stays there: this adds to your session, and Undo in Pro Tools takes it back. No audio file is written. Pressing again for the same take plays the copy that’s there.
It is dim while Pro Tools is rolling or the transport is armed, because Play would record, and in any record mode but QuickPunch and Normal. Turn off Loop Playback and Dynamic Transport first. Hover over it with SessionHUD in front to see why it is dim.
It says why and plays nothing if the take has been moved off the timeline, is cut into pieces or was placed twice, if the session has no track with that name, or if something is already on the playback track there, because it never puts a take over something else. The playback track also has to be an audio track, not armed, and mono or stereo like the take’s. Above or below means the track right next to the take’s: if that one can’t take the copy, or there is no track on that side, it says so and never moves on to another. A clip you renamed can’t be found. THE CURSOR IS STILL ON THE OLD TAKE means it could not put the cursor back: move it yourself before you record, or the next take covers the old one.
Markers in Pro Tools
The take sheet can put markers into the Pro Tools session as you log: one where each line, cue or column of your own starts, and one for each letter you press while a take records. It is off until you turn on Add markers in Pro Tools under Pro Tools Markers in Sheet Settings. Each sheet keeps its own choice, like every sheet setting.
Then choose, for Line, Cue and each column of your own, where its markers go: Off, Markers (the main marker ruler), or another marker ruler, Markers 2 to Markers 5. Show a ruler in Pro Tools with View › Rulers. If you renamed it, type its name in the field that appears. A marker goes at the very first sample of the take the value is typed on: type 35 in Line on take 12, and the marker is at the start of take 12, not on the takes recorded under it. Typing the same line again on a later take is a second go at it, and a second marker. The marker is written when you leave the field, not as you type.
For Letters, choose Record Track to put each letter on the take’s own track, or a ruler. A letter’s marker goes in the moment you press + while the take is recording, where you pressed it, and − takes it out again. A take that starts with letters has A at its start. A letter added after the take has stopped has no moment in the take, so it gets no marker. Since a read begins before your hand moves, Place letters can put every letter’s marker up to 3 seconds before the press. Each letter is always the same colour in Pro Tools, so you can tell them apart on the timeline: A blue, B orange, C green, D violet, E yellow, F cyan, G lime, then H blue again.
Section name and Letter name set what each marker is called. In a section’s name, {column} is the column’s name, {value} what you typed and {take} the take number, so the starting {column} {value} reads Line 35. In a letter’s, {take}{letter} reads 12B. A take number SessionHUD isn’t sure of is left out of a name rather than guessed.
Lines, cues and your own columns are written once Pro Tools stops. Letters go in as you press them, for a take started with New Take, Record or pre-roll, and when Pro Tools stops each one is checked against the take and moved if it is off. A take you punch into from playback has no known start until it stops, so its letters appear when it stops. A take that is no longer on the timeline gets no marker, and Diagnostics says so. So does a ruler Pro Tools doesn’t have: its marker goes on the main ruler instead.
The sheet stays in charge. Change a line and its marker is renamed; clear it and the marker is removed; the sheet’s own Undo puts it back. Each marker is a step on Pro Tools’ own undo list too, so after SessionHUD adds one, ⌘Z in Pro Tools takes that marker away before it reaches the take you just recorded. If you undo a take in Pro Tools, its markers are removed after your next take begins, so Redo in Pro Tools can still bring the take back until then. A marker you delete in Pro Tools stays deleted until you change that value on the sheet.
Turning markers on, or choosing a ruler for another column, marks only what you change from then on. To mark where the lines, cues and columns already on the sheet start, press Add Markers for This Sheet. It also rewrites any marker SessionHUD made before, by its number, so pressing it twice never makes a second one. It never adds letters: a letter marks the moment you pressed it, so only the press can place one.
Sheets, hiding and undo
Each Pro Tools session keeps its own sheets. One starts by itself at the session’s first take; New Sheet starts another and makes it current, and new takes go to the current sheet, marked Current in the list on the left. Clicking an older sheet shows it; Make Current, at the top or on a right-click in the list, sends new takes there instead. Right-click a row and choose Hide Take to leave a false start off the sheet; Show hidden takes in Sheet Settings brings hidden takes back into view.
Come back to a session on a later day and the take sheet asks before the first take whether today’s takes get a sheet of their own: Last take was Tuesday, October 28, with Keep This Sheet and New Sheet for Today. A new sheet is named for the day, such as Pickups Oct 31, and takes what you typed in the Next row with it. Keep This Sheet isn’t asked again that day. If you record without answering, the takes go on the current sheet as always, and the question goes away. It is asked only once the last take is at least six hours old, so a session that runs past midnight is never interrupted. Turn it off with Offer a new sheet on a later day, in Settings ▸ Take Sheet.
Undo, at the top, takes back the last change to a take’s cells — a mark, a letter, a hide, or what you typed in Line, Cue, Notes, your own columns or the Next row. What you typed in one field before leaving it is one undo, not a letter at a time. Typing in the Next row that a take has since picked up is not undone there. The take number, file and timing are what was recorded and are never edited; write a correction in Notes instead. Take sheets are kept while the take number is licensed, including during the evaluation.
A sheet goes by its session’s name until you give it one of its
own: type it in Sheet Name, under This Sheet in Sheet Settings, or right-click the
sheet in the list and choose Rename…. A named sheet is listed by its name,
with the day it started under it, and the name is the title of its exports and what
{session} puts in the file name. Clear the name to go back to the
session’s. For pickups recorded days later into the same session, press
New Sheet and call it Pickups: it starts with the last
sheet’s details, and the first sheet stays as it was.
The list on the left is every take sheet SessionHUD has kept: This Session first, then the History — every earlier session under Today, Yesterday, Earlier This Week and then each month. A session shows the days it was used, its sheets, takes and selects, and its talent and client; click it to open it. Each sheet shows when it started, its takes, selects, alts and lines, the time recorded on it, and who it was for. Click a sheet to open it. On an earlier session’s sheet you can still change what you typed — letters, selects and alts, lines, cues, notes, your own columns — and every one of its settings, with Pro Tools closed or another session open: its name and details, columns, tags, grouping, appearance, logging and setup in Sheet Settings, and its columns from their headings, as on a sheet open now. You can export or print it too. The takes themselves stay as they were recorded. Press Back to This Session, or the session’s name under This Session, to return — even before it has a sheet. Opening a session in Pro Tools returns the window to it on its own, keeping what you typed on the earlier sheet. A deleted sheet is only read until you restore it.
Search sheets, at the top of the list, finds a session by its name, by a sheet’s name, or by the client, talent or project on its sheets. The button beside it sorts the History by date or by name, shows only one Client’s or one Talent’s sessions (Clear under the search puts them all back), and opens or folds every session at once.
Right-click any sheet and choose Export PDF…, Export CSV… or Export Excel… to go straight to saving it, with no preview: it is written the way its own export was last set. Export with Preview… opens the export window to change that. Right-click a session’s name to export all its sheets at once, as PDFs, CSVs or Excel files, into a folder you choose — nothing already there is written over — or choose Show Session in Finder to find its Pro Tools session.
With no session open in Pro Tools the list still shows every session’s sheets. The button at the left end of the top bar hides the list, to give the takes the whole window, and shows it again. Drag the list’s right edge to make it wider or narrower; double-click the edge to put it back. The window remembers both.
Delete Sheet, in Sheet Settings or on a right-click in the list, moves the sheet you are looking at to Recently Deleted at the bottom of the list. Recently Deleted starts folded, showing how many sheets it holds; click its heading to open it, and the list remembers. Click a deleted sheet to read it, and Restore to put it back as it was; it is current again if it was current when you deleted it. A deleted sheet is kept for 30 days, then removed for good. Deleting the current sheet leaves none current: the next take starts a new one. A sheet cannot be deleted while a take is being recorded into it.
Exporting a sheet
Beside Export…, the take sheet says whether the sheet has gone out: Not exported, Exported 6:40 PM, or Exported 6:40 PM · changed since once you change anything after exporting. A sheet that has not gone out as it stands has an amber dot, there and in the list on the left, where a folded session carries the dot of any sheet in it. Printing counts, as Printed. Undo back to the sheet as you exported it and it reads as exported again. When you close a session in Pro Tools with the take sheet open and its sheet not exported as it stands, the window says so, with Export… and Not Now; the next take you record puts that away too. SessionHUD never sends a notification about it.
Export…, at the bottom of the take sheet, opens the sheet you are looking at in an export window: a preview on the left, exactly as the file will be, and the choices about it on the right. It opens on PDF, to print or send; switch to CSV or Excel (which Numbers and Google Sheets also open) at the top of the options, and the preview becomes the table the file will hold. The preview changes as you choose. Format, Takes and File name are always open; Columns, Page, Layout and Header are folded, each saying what it is set to, and stay open once you open them:

- Takes — all takes, selects only, or selects and alts; and Include hidden takes for a full log, false starts printed in grey. Takes missing from the Pro Tools session are left out, so the export matches what the client gets; Include missing takes writes them too (Missing takes).
- Columns — your sheet’s columns in their order, then Selects and Alts. Turn any of them off, or turn on one the sheet does not show. The take number is always written. To change the order on the export only, drag a column by the handle at the right of its row, or right-click it for Move Up and Move Down; the sheet keeps its own order, and a group’s bar moves with its column. Use the Sheet’s Columns puts the choice and the order back. For a PDF, Line Groups is among them, on or off as the sheet has it: the bar beside each line’s takes, with the line written on its first take, as on the sheet (a line of one take has a bar only with Show bar on single-take groups). With or without them, the line is written once, on its first take, as on the sheet; with neither the bar nor the band, the takes after it carry a ditto. Selects and Alts are left off the page while no take written has one, and kept in a spreadsheet.
- Page (PDF) — the paper (Automatic is US Letter or A4, by your Mac’s region), landscape or portrait, the text size from 70% to 150% (the rows and their padding grow with it), Row spacing — compact, standard or roomy — and Margins: narrow (a quarter inch), standard (half an inch) or wide.
- Layout (PDF) — Band over each line, a band over each line’s takes that says the line, its takes and its selects; turning it on turns Line Groups off, and turning Line Groups back on turns the band off. SessionHUD colors, for the bars in SessionHUD’s gradient, the bands tinted with it and its rule under the header; selects and alts marked on the take number and its letters as the sheet marks them, filled and outlined, so a black-and-white printout keeps them; Shading, by every other line or every other take, as on the sheet (by line, the takes after a line’s first need no ditto); and gridlines. Column widths: Fit to content makes each column as wide as what is in it; As on the sheet keeps the widths you dragged columns to on the sheet. Either way, Notes takes whatever width the page has left. A take with more letters than its Letters column holds prints the first and the last with an ellipsis between, as A B … F; a select or alt among the middle letters is still named in the Selects and Alts columns. Wrap long text, on unless you turn it off, lets notes, lines, cues and your own columns run onto more lines, the take growing to fit, instead of being cut off with an ellipsis.
- Header (PDF) — your studio name and logo, when they are set in Settings › Take Sheet, the name under the logo. Position puts them at the top right or the top left, beside the title, or at the top center, above it. Logo size runs from 50% to 300%: at 100% the logo fits in a box 2 inches wide and ½ inch tall, keeping its shape, and beside the title it takes half the page’s width at most. Crop away any empty border in the image, which counts as part of the logo. Then a title for this export (the sheet’s name if left empty), the date, the sheet details, a note printed under them, and page numbers. The date is the day the takes were recorded, or the first and last day when they span several, not the day the sheet was started.
- File name — made from
{session},{date},{time},{sheet},{client}and{talent}—{session}is the sheet’s name, and{date}the day its takes were recorded; the name it makes is shown under it. Until you change it, it is{session}_Takesheet, such as Episode 104_Takesheet.pdf; clear the field to go back to that.
The choices are kept with the sheet, so its next export looks the same and a new sheet in the session starts with them; the title and the note are for one export only. A setup takes them along when you save a sheet’s changes to it. The spreadsheets give every take its line, so they can be sorted and filtered. Print… prints the PDF directly. Export… asks where to save it, starting in the session’s Bounced Files folder, or in the session’s own folder until Pro Tools has made one. To start somewhere else every time, set Export to in Settings › Take Sheet; Use Bounced Files goes back. Nothing is saved until you press Save. When the export window closes, the keyboard goes back to Pro Tools.
Takes from the session’s files
To add takes the sheet missed — recorded before SessionHUD was open, or while logging was paused — or to make one sheet of a whole session, press From Session Files… under This Session in Sheet Settings, or choose File ▸ Add Takes from Session Files…. SessionHUD reads the session’s record folders (never writing to them) and lists every take, each with a tick. One per pass, by recording time puts files that started recording together on one row, numbered by the track you choose; One track’s takes lists one track’s takes.
Into the current sheet, the takes it already has are ticked and can’t be changed, the takes no sheet has are ticked, and the takes on another of the session’s sheets are unticked — tick them to add them here too. Into a new sheet, every take is ticked: that is a sheet of the whole session. Shift-click a tick to tick or untick every take from the last one you clicked; Select All and Select None do the whole list. A take that is already on a sheet comes as it was logged there, with its line, notes and marks; after that the two are separate, and a note changed on one stays on that one. The rest take their length and start timecode from each file, and are marked in Diagnostics as read from the files rather than watched being recorded. It is not available while recording.

After every take, SessionHUD also reads the finished file and corrects the take’s length to the file’s own. New Take Sheet is in the File menu, as well as at the top of the take sheet.
Opening with a session
A session’s sheets are kept with that session, and the sheet you were on when you left is the one it comes back to. Turn on Open with session under This Session in Sheet Settings and the window opens by itself whenever that session opens in Pro Tools, without taking the keyboard. Pause logging stops passes being added until you press Resume Logging, in amber at the top of the sheet beside Logging paused; the outputs carry on as ever. Both can be set for a session that is not open, from one of its sheets in the list, and apply when it next opens. From Session Files… and Check Against Session wait until the session is open in Pro Tools.
A session’s sheets belong to its session folder, the folder that holds the session file and its Audio Files, not to the session file’s name. Save As into the same folder, or rename the session file, and the sheets are still there; every session file kept in one folder — Episode 104, Episode 104 v2, Episode 104 Pickups — shares them, since they share one Audio Files.
If the session moves to another folder — Save Copy In, or the folder moved or renamed — SessionHUD asks the first time you open it whether it is the same session: Continue These Sheets carries on with the old session’s sheets, and Start Fresh keeps them apart. It never decides for you. It asks when Pro Tools reports the same session file, when the name matches, or when the session’s Audio Files folder holds the very files recorded on the old sheets. Sessions made from the same template are not taken for one another.
Sheet Settings
Sheet Settings is a panel down the right of the window, shown and hidden by its button at the top. Its sections run from this sheet and this session to the settings the sheet keeps, under the setup they came from. What holds for every take sheet is in Settings › Take Sheet. On a narrow window, opening Sheet Settings or the sheet list widens the window so the takes keep their room, toward whichever side of the screen has space; hiding it again gives the width back, unless you have resized the window meanwhile.

- This Sheet — Show hidden takes, then the sheet’s name and its details: the project, client, talent and your own fields. Details under them ticks which details this sheet has; Add Detail… adds one of your own, and Remove Detail takes it off. Which details a sheet has is part of its setup, so a change there shows Save Changes under Setup. Delete Sheet is last. Folded, the heading shows the sheet’s name.
- This Session — what is remembered about the session, From Session Files…, and Check Against Session (In Session).
- Setup — the setup this sheet is Based on and
Save as New Setup, with Save Changes and
Revert once the sheet has changed
(Setups). Choosing another setup under Based on also makes
it the one this session’s next sheets start from. Inside it are the sheet’s own settings. A
change to these stays on this sheet.
- Columns — a tick for each column, in the sheet’s order, Add Column… and Size to Fit. Drag a row up or down to move its column, Take included; click it to show or hide the column; right-click it to rename or remove it (Choosing columns).
- Grouping — Group by a column, then by the next, up to three, each with how its groups are marked; Shading, Show bar on single-take groups, Divide takes where the track changes and Name dividers; and which columns Fill down (Grouping takes).
- Takes — Short passes, shown or hidden under a number of seconds, for false starts; Missing takes, struck through (the default), hidden, or left as they are; and Letters per new take, none (the default) up to 6. A hidden pass is never removed: Show hidden takes brings it back, marked Short. Whether a sheet starts by itself is decided before there is a sheet, so it is in Settings ▸ Take Sheet.
- Pro Tools Markers — whether this sheet marks the Pro Tools session, and where (Markers in Pro Tools).
Click a section’s heading to fold it away or open it again; the panel remembers which you left folded, and a folded section says what it is set to. Columns starts folded, since it is the long list and a right-click on any heading opens it too, and so do Tags, Takes and Pro Tools Markers, which are seldom changed. The panel starts hidden, so the takes have the room, and the window remembers whether you left it open. It acts on the first click, and like the rest of the sheet off the Take and Letters columns, a click there brings SessionHUD forward with the keyboard. Take Sheet Settings… at the bottom opens Settings › Take Sheet: the list of setups, and what holds for every take sheet.
Sheet details
This Sheet, at the top of Sheet Settings, holds the sheet’s name and the project, client, talent and engineer, typed once per sheet and printed at the top of the exports. They start from the session’s previous sheet, or from the client, talent, project and engineer in Session Controls. Press Return in one to give the keyboard back to Pro Tools. Which details a sheet has is its own: tick them under Details, below the details.
Setups
Each sheet keeps its own settings: its columns, their names, order and widths, your own columns, tags, grouping, the look, sheet details, logging, and how it exports. A setup is what those settings start from, for a kind of session (an ADR setup, a music setup). A session’s first sheet starts with a copy of its setup, and a later sheet in the session with a copy of the sheet before it. Whatever you change on a sheet stays on that sheet, and nothing done to a setup afterward changes a sheet that already exists, or how it exports.
Setup in Sheet Settings says what the sheet is Based on. Two buttons show there once you change the sheet. Save Changes writes the sheet’s settings to that setup, for sheets started from it later; no other sheet changes. Revert puts the sheet’s settings back to the setup as it stands now. Undo takes back a Revert like any other change, and once the sheet is back where it started the buttons hide again. Column widths and export choices are saved with the rest, but changing only those leaves the buttons hidden. A sheet you haven’t changed stays as it is when its setup changes; the same place then offers Update from “Standard”, for when you want it to match, and Undo takes that back. If you press Save Changes on a sheet whose setup has changed since, it asks before replacing what was saved. Save as New Setup makes a new setup from the sheet’s settings and bases the sheet on it.
To use another setup on this sheet, choose it from the Based on menu. It changes this sheet only, and the session remembers it as its setup; if the sheet has changes not saved, it asks first. A sheet whose setup has been deleted goes on naming it and keeps its settings, with only Save as New Setup to offer.
The same menu ends with Rename “Standard”… for the setup it has ticked, and Delete…, which asks first: sessions that used a deleted setup start their next first sheet from Standard, and every sheet keeps its own settings. Standard is never deleted; Restore “Standard” to Default… puts it back as it shipped, and asks first too. The setup new sessions start from is chosen in Settings ▸ Take Sheet.
Columns
Columns in Sheet Settings, or a right-click on any heading, lists every column with a tick: Take, Line, Letters, Started, Timecode, Length, Track, File, Other Tracks, Cue, Notes, Selects, Alts, In Session and any of your own. Click one to show or hide it; the menu stays open, so you can change several at once. Take is always shown, so its tick is dimmed and stays on; drag it under Columns to move it like any other. The Standard setup starts with Line, Letters, Started, Timecode, Length, File and Notes.
To rename a column, right-click its heading, or its name under Columns in Sheet Settings, and choose Rename…. The name is typed on the column’s row in Sheet Settings, which opens to it: press Return to keep it, or Esc to leave the old name. A right-click on a built-in column says what it does. Once you have renamed one, it shows its original name in grey italics under Columns, and its right-click offers Revert to that name. An empty name does the same. If another column has taken the name since, rename that one first. Renaming changes only the heading, here and on exports: a column keeps what it does. Drag a heading sideways to move its column — Take included, so Line can come first — or drag its row up or down under Columns in Sheet Settings, or choose Move Left or Move Right on either right-click. A group’s bar has a short heading of its own, and follows its column; right-click it to hide the bar, or choose its mark under Grouping. When the columns you have on are wider than the window, the sheet scrolls sideways.
Columns size themselves to fit: each is as wide as its widest entry, and starts wide enough
for an ordinary one before anything is in it — three letters, a full timecode, a
line like 46A-54. Drag the line between two headings to make the column on its
left wider or narrower; from then on it keeps that width. Double-click the line, or choose
Default Width on a heading, to make it fit again, and
Size to Fit under Columns in Sheet Settings (Size All Columns to
Fit on a right-click) does every column at once.
Turning Size to Fit off on a heading gives the column a fixed width of its
own, and File and Notes then take the window’s spare room. The take number is always
exactly as wide as its numbers, and is not resized.
Show gridlines in Settings › Take Sheet draws a line between every column. It is off until you turn it on, and applies to every take sheet.
Your own columns
Press Add Column… under Columns in Sheet Settings and type its name on its new row there: Character, Mic, Scene, Comp, whatever your sessions log. It is a text column like Notes. Right-click its heading and choose Fill Down to type it once and have every take below follow it, as Line does, or Group Takes to join its takes too (Grouping takes). Remove Column takes it off the sheet; what you typed in it stays with the takes.
Grouping takes: Line, Spot, Episode
Line groups the takes of one line. A session often has bigger groupings too: the spots of an ad session, the episodes of a series, the chapters of a book. Any of your own columns can group its takes the way Line does, and so can Line itself, which you can also rename to Page, Section or Cue.
Set them under Grouping in Sheet Settings, or on a right-click on a column’s heading. Each column does two things, either, both or neither:
- Fill down: type a value once, and every take below shows it in grey until you type another. Off, a value shows on its own take only, like a note.
- Group: Group by Spot, then by Line joins each value’s takes. A value typed once groups every take below it until you type another, filled down or not: Fill down only decides whether the takes below show it. Mark with chooses how a group shows: a Bar in a narrow column directly right of it, a Divider over each new value, or No Mark. A group with no mark can still shade, as Every other Spot, and a new value still starts the groups under it over. Your own columns start with the divider, Line with the bar. A PDF prints only Line’s bar, so a column of your own marked with a bar prints a divider there instead.
Up to three columns group at once, and they nest in the order they stand: the leftmost is the outermost. Put Episode, then Spot, then Line, from left to right, to group spots inside episodes and lines inside spots. Move a column to change where it nests.
A new value clears what is under it. The first take of Spot 3 starts with no line, and a new Episode starts with no Spot or line, until you type them: what was carried belonged to the old one. Type them in the Next row before you record, if you know them. A change of record track only probably means a new line, so the line carries on there.
A value typed again starts a new group, even the same one: type Spot 3 again and the takes from there are a second go at Spot 3, with a divider of their own and the line cleared. A line typed again is a pickup, and its bar counts the takes the line already had.
Each group can also have:
- with a Divider, a rule over the first take of each value; the outermost group’s rule is the heaviest, and a track change on the same take shares it. A divider is a plain line, since the cell under it already shows the value. Turn on Name dividers, under Grouping in Sheet Settings, to have every divider say it: Surf 15, or Spot 3 for a value that is just a number, or Episode 2 · Spot 1 when both change at once. A divider whose column is hidden, on the sheet or in an export, is named either way, since nothing else shows the value;
- a Shading choice, such as Every other Spot;
- the same bands on the PDF.
No two columns can share a heading. If the built-in Cue column is shown, rename it before calling Line “Cue”.
Next: Settings › Take Sheet · Support.